MultiModem MTCBA-C Guía de usuario descargar pdf (Pagina 69)

Chapter 3 – Using the Web Management Software

MultiModem rCell User Guide 69

DHCP Server, Subnet Settings

General Configuration

DHCP (Dynamic Host Configuration Protocol) is a protocol that allows individual devices on an IP network to get

their own network configuration information (IP address, subnet mask, broadcast address, etc.) from a DHCP

server. The overall purpose of DHCP is to make it easier to administer a large network.

DHCP: Enable or disable the DHCP server.

Subnet: Enter the subnet address. If you want to change the DHCP subnet address, you first have to delete all the

subnet settings below.

Mask: Enter the subnet mask.

Gateway: Enter the gateway address.

DNS: Enter the DNS address.

Lease Time: Select the DHCP Lease Time from the selection box. Lease time is set in days, hours, and minutes. A

Lease Time of 00-00-00 is an Infinite Lease Time.

To save your changes, click SUBMIT.

To ensure your changes go into effect, click Save and Restart.

Subnet Settings

From-To Range: Enter the range of IP addresses to be assigned by DHCP.

Add: Click the Add button. The address range is added and appears in the table at the bottom of the screen. Once

the range displays, you can delete if necessary.

Note: See Appendix A Commonly Supported Subnets.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 99 100

Sin comentarios

MultiModem MTCBA-C Guía de usuario Pagina 69