MultiModem MTCBA-C Guía de usuario Pagina 44
- Pagina / 100
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 3 – Using the Web Management Software
44 MultiModem rCell User Guide
Daylight Configuration Group
Daylight Saving
Enable or disable Daylight Saving mode. The default is Enable.
Daylight Saving
Offset
Set the offset to use during Daylight Saving mode. Default is +60 minutes. Enter the time in + /
- minutes
.
Daylight Saving Start Time Group
Start Ordinal
Set the start ordinal to use during Daylight Saving mode. Options are first, second, third, fourth
and last. Default is second. Daylight Saving time usually starts at the same time on the same day
of the week in the same month every year. Each day of the week occurs four or five times a
month. Therefore, select the week in which daylight saving time starts, either the first, second,
third, fourth or the last of the month.
Start Month
Set the start month to use during Daylight Saving mode. Default is March.
Start Day
Set the start weekday to use during Daylight Saving mode. Default is Sunday.
Start Time
Set the start time to use during Daylight Saving mode. Default is 02:00 (hh:mm).
Daylight Saving End Time Group
End Ordinal
Set the end ordinal to use during Daylight Saving mode. Select the week in which daylight saving
time ends. Options are first, second, third, fourth and last. Default is first.
End Month
Set the end month to use during Daylight Saving mode. Default is November.
End Day
Set the end weekday to use during Daylight Saving mode. Default is Sunday.
End Time
Set the end time to use during Daylight Saving mode. Default is 02:00 (hh:mm).
Submitting and Saving Your Changes
To save your changes, click Submit.
To ensure your changes go into effect, click Save and Restart.
IP Setup, Static Routes Parameters
Networked computers use routing information to identify whether they are sending data packets directly to the
firewall or to another network.
After you define and add a route, you can use the table at the bottom of the group to delete or edit the route.
- MultiModem 1
- 74B98BRevision 2
- Related Documentation 8
- Safety Warnings 8
- RF Interference Issues 9
- Potential interference 9
- Front Panel 10
- Permanently On: 11
- Package Contents 12
- Specifications 13
- MTCBA-C1-EN2 14
- MTCBA-G2-EN2 15
- MTCBA-H5-EN2 16
- MTCBA-EV2-EN2 18
- RF Specifications 19
- Power Specifications 19
- MTCBA-H5-EN2-GP 21
- MTCBA-EV2-EN2-GP 21
- Cellular Information 22
- Making the Connection 26
- Using the Reset Button 27
- Setting TCP/IP Address 28
- Setting a Static IP Address 30
- Verifying Signal Strength 33
- Verifying Provider Fees 33
- Software Interface Overview 34
- Navigation bar 35
- Submenus 36
- General Configuration Group 38
- IP Configuration Group 38
- Syslog Configuration Group 38
- Auto Discovery Group 38
- Telnet Configuration Group 39
- HTTP Configuration Group 40
- Authentication Group 40
- General Group 41
- Daylight Configuration Group 44
- Add Static Routes Group 45
- Remote Configuration Group 45
- Local Configuration Group 46
- NMEA Configuration Group 47
- Communication Examples 47
- NAT Configuration Group 49
- PPP General Group 50
- ICMP Keep Alive Check 50
- Modem Configuration Group 50
- Comment 53
- Wakeup-On-Call Examples 54
- ● Caller ID Configuration 55
- 2. Press Enter twice 59
- Network Configuration Group 60
- Configuring the Network 60
- Service Configuration Group 61
- Packet Filter Group 62
- DNAT Configuration Group 64
- GRE Tunnels 66
- GRE Tunnels > GRE Tunnels 67
- DHCP Server, Subnet Settings 69
- DHCP Fixed Configuration 70
- IPSec > IPSec 71
- Add a New Connection 72
- Add an IKE Connection 73
- Add Manual Connection 75
- Router hardware 79
- Tools, Tools Parameters 81
- Firmware Upgrade Group 82
- Load Configuration Group 82
- Tools, Save Configuration 83
- Statistics & Logs 84
- Industry Canada 94
- REACH Statement 95
- Standards 97
- Standards (in Chinese) 98
Relacionado con productos y manuales para Redes MultiModem MTCBA-C
Redes MultiModem MTCBA-C Manual de usuario
(4 paginas)
(4 paginas)
Redes MultiModem MTCBA-C Guía de usuario
(24 paginas)
(24 paginas)
Redes MultiModem MTCBA-C Guía de usuario
(70 paginas)
(70 paginas)
Redes MultiModem MTCBA-C Especificaciones
(8 paginas)
(8 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.024 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales