MultiModem MTCBA-C Guía de usuario descargar pdf (Pagina 48)

Chapter 3 – Using the Web Management Software

48 Multi-Tech Systems, Inc. MultiModem rCell User Guide

37B38BSerial-Port

38BSerial-Port > Serial Port Settings

Serial-Port Configuration

Serial-Port Configuration allows for the configuration of the serial terminal connected to the RS-232 connector DE9 on the back

of the unit.

Baud Rate: Sets the baud-rate at which the serial terminal will be communicating. The default is 115200.

Flow Control: Sets the flow control for the serial port. The selections are None or RTS-CTS. The default is None.

Data Bits: Sets the data bits for the serial port. Data bit selection is 7 or 8. The default is 8.

Stop Bits: Sets the stop bits for the serial port. The selections are 1 or 2. The default is 1.

Parity: Sets the parity for the serial port. The selections are None, Even, or Odd. The default is None.

Buffer Length: Sets the length up to which the data from the serial device is buffered before IP transmission. The

default length is 32-characters.

Timeout: Sets the timeout value for the serial terminal of how long it should wait before IP transmission, The

default is 1-second.

105B115BSubmit Button

Click the Submit button to save these settings.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 69 70

Sin comentarios

MultiModem MTCBA-C Guía de usuario Pagina 48